Neutec Group is proud to offer few tiers of Imaging solutions to many challanges in today's demending imaging requirments.
Multispectral imaging - Videometer Lab4
VideometerLab 4 is an all in one vision-based lab analyzer designed for fast and accurate determination of surface color, texture, shape, size and chemical composition.
The easy-to-use system integrates illumination, camera, and computer technology with advanced digital image analysis and statistics. VideometerLab 4 provides a rapid assessment of uniform and non-homogeneous samples by combining information on all of the above parameters automatically in just a few seconds, requiring no sample preparation and leaving the sample intact.
Using stroked LED technology VideometerLab4 combines measurements at up to 20 different wavelengths into a single high-resolution multispectral image. Every pixel in the image is a spectrum and the system can include wavelengths outside the range detected by traditional RGB technology.
Why use VideometerLab 4?
Currently, the non-destructive investigation of materials with non-uniform color and texture can be difficult, tedious and expensive. Conventional techniques such as NIR spectroscopy only measure a single point or average over a fixed area and do not give an objective overall assessment of visual quality.
Learn More about the Videometer Lab 4 >>
Seed and grain Anlyzer - Vibe QM3
The Vibe QM3 Seed Analyzer measures, counts and classifies seeds size, shape and color. Analysis results are absolute, accurate and reproducible.
One of the key features of the Vibe QM3 is the speed and accuracy of results. Up to 40g samples of seeds can be analyzed and reported upon in less than 10 seconds using
a simple 3 step process.
The Vibe QM3 provides seeds buyers and sellers an ‘expert’ inspection and analysis instrument that overcomes the limitations of subjectivity and speed that are evident in
manual inspection methods. Furthermore, the superior resolution of the optical system in the QM3 provides higher levels of accuracy and reproducibility of results when compared with other
instruments in RGB available in the market today
Learn more about the Vibe QM3 >>
FREQUENTLY ASKED QUESTIONS
The Videometer Lab 4 uses a 2192 x 2192 pixel camera with 41 micron resolution. There is an option to go to a 2704 x 2704 pixel camera with 33 micron resolution.
The Videometer Lab 4 MultiSpectral imager uses 19 wavelengths of light from 365nm- 970nm, with two extra channels for illumination options or additional wavelengths.
Yes, the Videometer Lab 4 has the optional capability to have fluorescence capabilities added with a carousel addition of up to 5 filters
Yes, the VideometerLab 4 has been used in a production lines for QC applications previously. Only a selection of the Leds are used as part of the analysis online to reduce the capture time
The VideometerLab 4 uses a radiometric and geometric calibration procedure with NIST traceable standards. Automatic diagnostic tests can be performed routinely to ensure instrument stability.
Yes, if your desired sample has a spectral signature, even if it is in the ultraviolet or near infrared the videometerlab maybe able to detect it.