Stirring shaft with floating blades CAT. NO. A00001304

Characteristics: The two blades that open as the speed rises generate an axial flow in the container, from the top towards the bottom. Particularly recommended for stirring in narrow-neck containers, e.g. flasks.
 

Technical data:
Shaft Ø: 7 mm
Blade Ø: 93 mm
Shaft lenght: 400 mm

Stirring shaft with folding blade CAT. NO. A00001305

Characteristics: The blade that automatically falls into line during rotation generates an axial flow in the container, from the top towards the bottom. Particularly recommended for stirring in narrow-neck containers.

Employment: Use at medium-high speed for whirling light solids, flocculations, mixing thickening agents, stirring sludge, etc.

Technical data:
Shaft Ø : 7 mm
Blade Ø: 60 mm
Shaft lenght: 400 mm

Stirring shaft with fixed blade CAT. NO. A00001306

Characteristics: It generates an axial flow in the container,from the top towards the bottom.

Employment: Use at medium-high speed for whirling light
solids, flocculations, mixing thickening agents, stirring sludge, etc.
 

Technical data:
Shaft Ø : 7 mm
Blade Ø: 50 mm
Shaft lenght: 400 mm

Stirring shaft with propeller Cod. CAT. NO. A00001307

Characteristics: Standard stirring shaft. It generates an axial flow in the container with suction of the substance from the bottom towards the top and localized occurrence of shearing forces.

Employment: Use at medium-high speed for whirling light solids, flocculations, mixing thickening agents, stirring sludge, etc.

Technical data:
Shaft Ø : 7 mm
Blade Ø: 60 mm
Shaft lenght: 400 mm

Stirring shaft with 6- hole paddle CAT. NO. A00001308

Characteristics: It generates a tangential flow with reduced turbulence and with gentle mixing of the product.

Employment: Use at medium to low speeds where good heat exchange between the components to be mixed is required.
 

Technical data:
Shaft Ø : 7 mm
Blade Ø: 69 mm
Shaft lenght: 450 mm

Stirring shaft with turbine blade CAT. NO. A00001309

Characteristics: It generates a radial flow with suction of the product from the top towards the bottom, with high turbulence and high shearing forces.
 

Employment: Use at medium to high speeds to dissolve and disintegrate particles.

Technical data:
Shaft Ø : 7 mm
Blade Ø: 49 mm
Shaft lenght: 450 mm

Stirring shaft with turbo propeller CAT. NO. A00001310

Characteristics: It generates an axial flow in the container with suction of the substance from the top towards the bottom with low shearing forces. Limited danger of any contact of the blade with the walls of the product’s container.

Employment: Use at medium-high speeds for whirling light solids, preparing dye mixtures and for flocculations.
 

Technical data:
Shaft Ø: 7 mm
Blade Ø: 46 mm
Shaft lenght: 450 mm

Stirring shaft with anchor CAT. NO. A00001311

Characteristics: It generates a tangential flow with high shearing forces on the ends. The flow generated limits the possibility of sedimentation on the walls of the container.

Employment: Use at medium-low speeds for
homogenizing high contents of solids in liquids with medium-high viscosity.

Technical data:
Shaft Ø: 8 mm
Blade Ø: 45 mm
Shaft lenght: 450 mm