| Motor |
Stepping. Angle 7.5°.
9 W |
| Syringe volume |
10, 5, 2.5 or 1 ml autoclavable |
| Maximum flow speed |
4 ml/s with 10 ml syringe |
| Minimum volume step |
1/1000 of the total volume of syringe |
| Use of disposable tip |
Programmed from the beginning of process |
| Air bubble volume |
Programmable. |
| Sample volume |
Programmable. Limited to the tip volume(1300
µl) |
| Min. sample volume |
1% of the syringe volume used. Warning
notice if it is less than 5%. |
| Dilution factor |
Programmable from 1:1 to 1:1000 |
| Reproductibility |
Better than 1% even for dilutions using
morethan one single syringe stroke |
| Printer communication |
Serial RS 232, programmable |
| Mains |
100/240 V, 50/60 Hz |
| Power |
40 W |
| Dimensions (WxHxD) |
30x30x20 cm11,8x11,8x7,8 cm |
| Weight |
6 kg/13,2 lb |
| FOR ADVANCED ONLY |
| Balance communication |
Serial RS 232, programmable |
| Gravimetric dilution |
By specific weight of solvent |
| Linked programs |
Up to 9 |